APISQUEEN U5 24V 14KG (30.8lbs) Thrust Brushless Underwater Thruster/Motor Kit/Kit with Remote Control for Boat/Kayak/Inflatable Boat/Paddleboards
We are the source factory, please contact us at lynn@underwaterthruster.com for bulk purchase/customisation.
Engine: 3550;
KV: 350;
Maximum thrust: 6±1Kg (one thruster thrust)
Power: 800W;
Voltage: 12-24V (ESC supports up to 29.2V when the battery is fully charged);
Material: nylon shell;
Weight: 290g.
Length of one thruster cable: 1.5 m
Package content: Thruster*2, ESC (built-in white waterproof sealing box)*2, remote control (not waterproof)*1, fins*2, fin holder*2, white sealing box*1, screws*6
About the remote control:
(1)The remote control is not waterproof;
(2) All operations of the remote control are set up, and you can use it by directly turning on the switch and toggling the rocker.
Used in fresh water, does not support the use in sea water.
The ESC is specially developed for underwater propulsion with the following features:
1. Proprietary firmware for ApisQueen thrusters is specifically designed to enhance the superior performance of the thruster. The hardware-generated motor PWM improves the smoothness of the throttle response and reduces noise.
2.ApisQueen's exclusive firmware generates regenerative braking to make it more efficient. When the throttle changes from large to small, the propeller deceleration response is more rapid, and the stability and flexibility of the propeller is significantly enhanced.
3. ESC automatically detects the throttle signal when powering up, supports 1-2ms pulse width input, supports Oneshot and Multishot in normal PWM throttle mode.
4. Support Dshot150, Dshot300, Dshot600. Dshot is a digital signal, strong anti-interference ability, ESC does not need to calibrate the throttle stroke.
5. The signal cable is a twisted silicone cable, which increases its service life and effectively reduces the interference caused by signal transmission in copper wires, making the thruster more stable.
Shipping List
