Knowledge

APISQUEEN A300 remote control usage and function explanation

Posted by Fengyukun on

This article mainly explains the usage and functions of the A300 remote control. How to use the remote control: First, we turn on the remote control, then connect the power supply, and wait for the device to pass the self-test before starting to use it. Push the remote control joystick upward, the left and right propellers blow air forward and move forward.Pull the remote control joystick downward, the left and right propellers blow air backward and move backward.Push the joystick to the left, the left propeller blows air backward, the right propeller blows air forward, and turns left.Push the joystick...

Read more →

What if the underwater thruster Set stops working?

Posted by Fengyukun on

What to do if the underwater thruster unit suddenly stops working? Generally, both propellers are not working or only one propeller is working. Case 1: Both thrusters do not rotateThere are several possibilities: 1. The power connection is poor. There is no prompt sound when connecting the power. You can check whether there is a voltage display on the remote control screen. If it is 00.0v, the power is not connected properly.Please reconnect the power supply. The thruster will make a prompt sound. The remote control screen will display the current battery voltage. Then try to push the joystick to...

Read more →

PWM speed control knob use method

Posted by Fengyukun on

This article explains how to use the pwm knob.Firstly, it explains the functions and parameters of this product and the requirements for its use. (Figure 1) There are three scales above the PWM knob, respectively: 1ms, 1.5ms, 2ms, these parameters indicate the throttle travel of the ESC, 1 is the lowest throttle, 1.5 median throttle, 2 is the highest throttle.It is also the pwm signal 1-2ms. When using one-way ESC, 1ms is the lowest throttle travel, that is, zero position, in this position the propeller will not run, need to be adjusted to the 1ms position of the power supply,...

Read more →

APISQUEEN water pipe brush underwater ROV installation tutorial

Posted by Fengyukun on

Connect the tubes according to the numbers marked in the picture (each tube has a serial number on it): First, put the foam roll into tube No. 2;Connect the left and right ends of tube No. 2 to tube No. 1 and use a rubber hammer to tighten it;Connect tube No. 3 to tube No. 1, one with holes and one without holes on each side;Connect tube No. 1 to the perforated tube No. 3;Connect tube No. 6 to tube No. 8;The other end of tube No. 6 is also connected to tube No. 8;Connect tube No. 4 to tube...

Read more →

Upgraded control box works even in the rain——APISQUEEN underwater thruster Set

Posted by Fengyukun on

Many customers have always felt that the upgraded control box is not waterproof, the old version is waterproof, or the old version is more waterproof than the upgraded version. Here we will introduce the special features of the upgraded control box.First, let's take a look at the appearance of the control box: ① All-metal top cover, 2 external fans to accelerate the heat dissipation effect, and there is 704 glue on the fan power cord to prevent water from entering the control box. ② The metal top is designed with multiple strip compartments to provide better fan heat dissipation for...

Read more →