APISQUEEN A300 remote control usage and function explanation

This article mainly explains the usage and functions of the A300 remote control.

How to use the remote control:

First, we turn on the remote control, then connect the power supply, and wait for the device to pass the self-test before starting to use it.

Push the remote control joystick upward, the left and right propellers blow air forward and move forward.
Pull the remote control joystick downward, the left and right propellers blow air backward and move backward.
Push the joystick to the left, the left propeller blows air backward, the right propeller blows air forward, and turns left.
Push the joystick to the right, the right propeller blows air backward, the left propeller blows air forward, and turns right.
(The larger the push rod amplitude, the faster the speed.)

(Use tissue to show)

Note: When pushing the joystick, do not tilt it, you need to push it straight. Tilting the push rod will cause the hull to yaw, or one of the propellers will not work.

Cruise control function demonstration:

Push the joystick forward, press the ok button on the back of the remote control head, and then release the joystick. At this time, the propeller will continue to run according to the previous throttle amount.

Push the joystick forward once, the throttle will increase by 5%, and it will continue to increase until 100%.

Push the joystick backward once, the throttle will decrease by 5%, and it will continue to decrease until 0%.

Push the joystick backward again, and the thruster will move backward, and each push backward will increase by 5%.
Until 100%, push the joystick forward, and the speed of moving backward will decrease by 5%.
When you need to exit the cruise control function, press the OK button again.
When entering the cruise control, the remote control display will display an icon, indicating that this function has been turned on.
When exiting, the icon disappears, indicating that the cruise control function has been exited.

The 3.4.5.6 channel buttons are reserved function buttons. All 3-6 channels of our company's package products are reserved. The buttons do not work. If you need to add functions, please contact our customer service staff.

If you purchase a remote control separately and need to use these channels, you can use them yourself or ask the customer service before using them.

The A300 remote control has locked the fine-tuning key when it leaves the factory. The fine-tuning key cannot be used directly and needs to be unlocked before use.
Unlocking method: Press and hold the 6-channel button, then turn on the remote control. The remote control will emit a prompt sound 2-3 seconds after it is turned on, and the "lock" icon on the display will disappear, indicating that the unlocking is successful.
If you need to lock, first turn off the remote control key. In the same way, press and hold the 6-channel button, then turn on the remote control, wait for the prompt sound, and the "lock" icon will appear on the display, indicating that the lock is successful.
If you need to use the fine-tuning key to achieve certain effects, please contact us for details.