Knowledge — Thruster

What to do if the underwater thruster unit suddenly stops working? Generally, both propellers are not working or only one propeller is working. Case 1: Both thrusters do not rotateThere are several possibilities: 1. The power connection is poor. There is no prompt sound when connecting the power. You can check whether there is a voltage display on the remote control screen. If it is 00.0v, the power is not connected properly.Please reconnect the power supply. The thruster will make a prompt sound. The remote control screen will display the current battery voltage. Then try to push the joystick to...

Connect the tubes according to the numbers marked in the picture (each tube has a serial number on it): First, put the foam roll into tube No. 2;Connect the left and right ends of tube No. 2 to tube No. 1 and use a rubber hammer to tighten it;Connect tube No. 3 to tube No. 1, one with holes and one without holes on each side;Connect tube No. 1 to the perforated tube No. 3;Connect tube No. 6 to tube No. 8;The other end of tube No. 6 is also connected to tube No. 8;Connect tube No. 4 to tube...

Many customers have always felt that the upgraded control box is not waterproof, the old version is waterproof, or the old version is more waterproof than the upgraded version. Here we will introduce the special features of the upgraded control box.First, let's take a look at the appearance of the control box: ① All-metal top cover, 2 external fans to accelerate the heat dissipation effect, and there is 704 glue on the fan power cord to prevent water from entering the control box. ② The metal top is designed with multiple strip compartments to provide better fan heat dissipation for...

U01 dual-engine kit tutorial is here, follow us to install it quickly and easily.U01 Underwater Thruster Kit includes the following products: ①First, we turn on the power and adjust it to 16v. Connect the three-phase line of the thruster to the three-phase line of the ESC.   ②Connect the power cable of the ESC to the 1:3 adapter cable   ③Connect the signal line of the ESC to the receiver   (Receiver Description)  ④The signal line of the left ESC is inserted into channel 1, and the signal line of the right ESC is inserted into channel 2. (Pay attention to...

Hello everyone, today I will introduce a new underwater propeller - X8. (X8 underwater thruster and basic parameters) This model has a unique design - metal mesh cover, and the propeller is made of all metal (aluminum alloy). As the core driving component of the equipment, the motor plays a vital role in performance, so we use an inner rotor motor. The design of the inner rotor motor makes it fearless of mud and sand, and can run stably in harsh environments; the metal cover further improves the safety of use, and the wire is silicone wire, which is resistant...